Table of Contents
Advertisement
Ingeteam Power Technology, S.A.
When performing any operating or manipulation task, first ensure that no voltage is present.
As a minimum safety measure for this operation, the 5 Golden Rules must be followed:
1.
Disconnect.
2.
Prevent any possible re-connection.
3.
Check that no voltage is present.
4.
Ground and short-circuit.
5.
Protect against nearby live equipment, where appropriate, and place safety warning signs to
demarcate the work area.
Non-live work cannot be authorised until all five steps have been completed. Therefore, any work prior
to compliance with these steps shall be considered to be work on live parts.
iv
Installation manual
AAY2000IKI06
Advertisement
Table of Contents
