Teldat K Seres Installation Manual page 14

3 Components and Power Supply
Leds panel
Fig. 6:
The LEDs for the Teldat K router family are shown in the above figure. The table below contains a description on
them.
LEDs table
LED
PoE
PSU
Alert
USB
.
Wi-Fi
8
Status
Monochrome Green
Monochrome
Green
-
Tricolor
Bicolor
Description
Off -> not being powered through
PoE.
On -> powered through PoE.
Off -> not being powered through
PSU
On -> powered through PSU
Not defined.
Off -> system is powered off.
Red -> interface is unavailable be-
cause it is installing; it is not enabled
(shutdown) or due to auto-test failure.
Amber -> idle.
• Rapid blinking. It has not registered
in the network or the quality is in-
sufficient.
• Slow blinking. GSM connection
(GPRS).
• Steady. WCDMA (UMTS / HSDPA)
connection.
Green -> connected. Blinking: con-
nection data activity.
Red -> interface down.
Green -> interface up.
Teldat S.A.
Teldat K/KF router