Table of Contents
Advertisement
Press the "Switch Trace Display" menu in the lower right corner of the screen, and the whole measured
optical fiber link is displayed graphically. The event type of each event point, the distance from the instrument
test port, the result of "Pass/Fail" judgment and the distance between two adjacent events are displayed in the
event map.
：Connector diagrams, such as square flanges, circular adapters, SC, ST, LC connectors, etc.;
：Optical fiber fusion point diagram;
：Optical fiber splitter diagram;
Tips: According to the threshold of analysis parameters set in the eligible criterion, the green border
represents "Pass", the red border represents "Fail", and the gray border represents "Unknown".
3.10 End Face Detector(FED)
Connect the external end detector to the USB port of the instrument.
In the main menu interface, press the menu or icon to enter the end detection interface.
Press【X2】menu to enlarge the end display interface.
Press【X1】menu to restore the interface proportion of the end display.
Note: This function needs to purchase probe to cooperate with the instrument.
: Optical fiber end diagram;
: Optical fiber Macro-bend diagram.
32
Advertisement
Table of Contents
