Saluki S2106 Series User Manual page 22

 Receiving fiber length: used to set the length of OTDR
terminal access guide fiber, ranging from 0 to 100. The unit is
consistent according to the set unit, which is usually 0 by
default.
Setting method: press [receive fiber length] to pop up the
input interface, and then [OK] to exit.
 Event loss threshold: It is used to set the loss thresholds of
connection points, fusion points or macro bends in links that
OTDR can test, ranging from 0.01 to 30, usually defaulting to
0.1. When analyzing the measured link, events larger than
event threshold will be listed in the event table, and those
smaller than event threshold will be ignored.
Setting method: Under the parameter setting interface, press
[Event Loss], pop up the event loss threshold input interface,
input the threshold value, press [OK] to exit.
18