Saluki S2106 Series User Manual page 19

 Wave：Set the test wavelength of OTDR。
Setting method: Under the parameter setting interface, the corresponding wave can be selected by pressing
[Wave], [1310nm], [1550nm] or [1310/1550nm].
 Measurement mode：The method used to select OTDR scanning events includes "auto test", "real test" ,
"average test" and "PON mode".
Auto-Test：Intelligent test method. In this way, the instrument will automatically match the test conditions
according to the measured links, without the need for users to set parameters manually.
Real-Test： Real-time scanning of the measured link and displaying the test results each time can realize
dynamic monitoring of the link and the state before and after continuation.
Av.-Test ： In order to further improve the quality and accuracy of the test curve, the scanning results are
accumulated and averaged.
PON Mode：Test optical links with splitters.
Setting method: Under the parameter setting interface, press [Auto Test], [Real-T], [Aver.-T], and [PON], and
select the appropriate test mode.
15