Table of Contents
Advertisement
Press the [Threshold] to enter the setting interface:
Splice Loss: Click on "+" and "-"
can increase or decrease the threshold,
each step changes 0.02dB, or click
the corresponding position of the
threshold.
Connection Loss: Clicking on "+" and "-" can increase or decrease the threshold, changing 0.25dB per step,
or clicking on the corresponding position of the threshold.
Bending Loss: clicking on "+" and "-" can increase or decrease the threshold, changing 2dB at each step, or
clicking on the corresponding position of the threshold.
After the threshold setting is completed, click "OK" to save the settings and click "Test" to start the average
test.
After the test, the link test trace is displayed, and all event information in the link is displayed in the event
list. Link information shows test wavelength, fiber link length, total link loss, number of events and number of
location events.
31
Advertisement
Table of Contents
