Table of Contents
Advertisement
Cable ID and Cable Code set at the initial laying of line.
Data Flag: BC - Create a test for newly laid optical fiber lines; RC - Maintenance is the completion of line
laying and later maintenance testing; OT - Others are tested according to the actual situation.
O.Location:
Link
Position.
T.Location: Link Endpoint Location.
Fiber Type: Choose the type of fiber
optic cable under test. The types of optical fibers are: 651 multi-mode fibers, 652 general single-mode fibers,
653 dispersion-shifted fibers and 655 non-zero dispersion-shifted single-mode fibers.
Operator: Name of tester.
Comment: Fill in the test conclusion
and judgment of the tested optical fiber.
If the above information is not clear,
do not fill in.
There are two types of test trace storage: Fast Save and Auto Save.
Fast Save - By Time: Store according to the end time of the test, such as the track of the test at 8:8:59
Starting
Point
24
Advertisement
Table of Contents
