Introduction And Safety Information - Landoll Brillion Zone Commander 2511 Operator's Manual

The Brillion Model 2511 Zone Commander is a quality product designed to give years of trouble free performance. By
following each section of this manual, your system will perform as designed for you and your operation.
CHAPTER 1
CHAPTER 2
CHAPTER 3
CHAPTER 4
CHAPTER 5
PARTS MANUAL
WARRANTY
COMMENTS

Introduction and Safety Information

Gives basic instructions on the use of this manual and understanding the safety
statements.
Gives product specifications for the equipment. These specifications supply lengths and
measures for your equipment. A Standard Bolt Torque Table is provided to give
guidelines for bolt torques to be used when servicing this product.
Contains assembly instructions for your 2511 Zone Commander. When these
procedures are correctly followed, your equipment should provide you years of
trouble-free operation and service.
Instructs how to operate your equipment before using it, and describes adjustments
needed. Gives practical advice for the care and maintenance of your Landoll equipment.
Drawings in this section locate adjustment points on the equipment.
IF YOU HAVE ANY QUESTIONS CONTACT:
PHONE # (785) 562-5381 or (800) 428-5655
Is a troubleshooting guide to aid in diagnosing and solving problems with the Zone
Commander.
Is a separate manual showing the various assemblies, subassemblies, and systems.
Refer to that manual when ordering Landoll replacement parts. Order parts from your
Landoll dealer.
The Warranty Registration form is included with the product documents. Fill it out and
mail it within 15 days of purchase.
NOTE: IMPROPER ASSEMBLY, MODIFICATION, OR MAINTENANCE OF YOUR
LANDOLL MACHINE CAN VOID YOUR WARRANTY.
Address comments or questions regarding this publication to:
ATTENTION: PUBLICATIONS - DEPT. 55
LANDOLL CORPORATION
1900 NORTH STREET
MARYSVILLE, KANSAS 66508
OR
FAX # (888) 527-3909
LANDOLL CORPORATION
1900 NORTH STREET
MARYSVILLE, KANSAS 66508
Chapter 1
1-1