thomann Stairville DMX Invader 1024 NET User Manual page 56

Operating
Changing the fade mode for
chasers
56
3. Select the desired chase or chases using the number buttons [1 ... 31].
ð The desired chase or chases are being played.
If the number of chases to be played at the same time exceeds the permissible
number, the message 'Chase over load!' appears in the display.
If several chases are played simultaneously, the display shows the settings of the last
chase in the sequence.
Chasers can be played with two fade modes:
In the default setting 'Only x/y' only the X and Y channels can be assigned a fade effect, all
n
other channels have no fade effect.
n In the setting 'All channel' , all channels can be assigned a fade effect.
1.
Press [PROGRAM] for 3 seconds.
ð The fade effect is switched.
2. Release [PROGRAM] .
ð The new setting is active.
DMX controller