thomann Stairville DMX Invader 1024 NET User Manual page 34

Operating
34
3. Turn the jog wheel [ Y/CROSS] to the left or right to set the desired value and press the
jog wheel [ Y/CROSS] to confirm.
ð The setting is accepted.
4. To return to the next higher menu level without changes, press [SETUP].
The following settings can be made in the main menu:
No. Display
1 RDM function
2 Set IP Address
3 Set Net Mask
4 Set MIDI
5 Set Audio
DMX controller
Function
Changes the parameters of all RDM-compatible devices.
Sets the IP address.
The device has a 100 Mbps Ethernet interface. To use the
network function, the IP address must be set.
Sets the network mask for the Ethernet interface.
Sets the MIDI channel.
Sets the sensitivity of the audio interface.