Editing A Chase - thomann Stairville DMX Invader 1024 NET User Manual

Operating

6.4 Editing a Chase

Inserting steps in or removing
from a chase
52
The device can store 62 chaser programmes, each with up to 100 steps. Steps correspond to
scenes.
1.
Press [PROGRAM] to enter the Edit mode.
ð The [PROGRAM] LED flashes.
2. Press [CHASE (A)] or [CHASE (B)] and the number buttons [1 ... 31] to select the number of
the chase you want to edit.
3.
To insert a new step into the chase, press [INSERT].
ð The sum of the steps in the chase and the number of the current step are shown in
the display. The last step of a chase is marked with a *.
4.
To copy the current step, press [COPY].
5.
To copy all the steps of a chase, press and hold [COPY] for about 1 second.
6.
To insert a copied step from another chase into the current chase, press [PASTE].
7. To delete the current step, press [DELETE].
DMX controller