CYBEX 770T Service Manual page 71

3.
Tap the Toolbox
OEM Diags (Diagnostics)
1. Tap the OEM Diags icon to display the OEM Diagnostics menu.
OEM Diagnostics menu:
Build Report
Error Log
Touch Test
Touch Cal
2.
Tap the Toolbox
Exit Diagnostics
Exit Diagnostics by tapping the Toolbox
refresh.
Diagnostics when CardioTouch screen is not functioning
The incline motor and drive motor can be tested if the CardioTouch Screen is not functioning.
1.
Press and hold the Fan
2.
Release the Fan
The Incline and Speed LED's will blink indicating Diagnostics Mode.
Press any one of the Incline or Speed keys within the first ten seconds, otherwise Diagnostic Mode
will exit.
3.
The Incline Up
active.
4. Press the Stop key to stop the running belt and exit to Dormant Mode.
Cybex 770T/790T Treadmill Part Number
icon to return to the Toolbox screen.
Displays software versions and component information.
Base S/N, Console S/N, MCC Code Revision, GFX Code Revision, EPEM or
LED Code Revision, Drive Revision, Install date, Date/Time, HR Device
name/type, Errors (# of errors in the log), Brake Type
Displays number of errors, up to 20. If no errors are stored [ 0 ] [Err ] [Log] will
be displayed. See Error
Test CardioTouch screen. Touch anywhere on screen to display cross hairs
Touch four corners to calibrate CardioTouch screen.
icon to return to the Toolbox screen.
key for at least three seconds until the console beeps twice.
key and press the Volume Down
, Incline Down
Codes.
icon, then tap the Home icon
, Speed Up and Speed Down
Page 71 of 261
. The screen will
key within two seconds.
keys are now