CYBEX 770T Service Manual page 169

Remove end caps
1. Remove two screws securing right end cap using a Phillips screwdriver.
2. Repeat step for left end cap.
Remove top steps
1. Remove the right top step by inserting a long 3/8" drive socket extension into the right top step and
prying backwards.
2. Remove right top step.
3. Repeat steps 1 and 2 for left top step.
Loosen rear roller
Loosen the rear roller mounting bolts using a 3/4" Socket wrench.
Loosen front roller
Loosen the front roller mounting bolts using a 9/16" Socket wrench.
Remove drive belt
Remove the drive belt off of the drive motor pulley.
Cybex 770T/790T Treadmill Part Number
Page 169 of 261
Item Description
1 Screws
2 Right end cap
Item Description
3/8" Drive Socket Exten-
1
sion
2 Right Top Step
Qty.
2
1
Qty.
1
1