CYBEX 770T Service Manual page 118

2. Remove the two screws securing the headphone jack cover to the handset using a Phillips
screwdriver.
3. Insert USB stick into the internal USB port.
4. Toggle the power switch on (I).
The software will load into the console. This procedure will take approximately 3 minutes. During
this time there will be beeping noises from the console. When the upload is complete, the display
will show [re][bot].
5. Toggle the power switch off (0).
6. Remove USB stick from internal USB port.
Install software through external USB port
1. Insert USB stick into the external USB port.
Cybex 770T/790T Treadmill Part Number
Console damage may occur.Do NOT turn the power off, press any keys,
or remove the USB stick during this procedure.
Page 118 of 261
Item Description
1 Internal USB Port
2 Handset
3 Screws
4 Headphone Jack Cover
Item Description
1 External USB port
Qty.
1
1
2
1
Qty.
1