CYBEX 770T Service Manual page 146

Remove front roller
1. Loosen the left mounting bolt using a 9/16" Socket wrench.
2. Loosen the right mounting bolt using a 9/16" Socket wrench.
3. Remove both mounting bolts.
4. Slide the drive belt off of the front roller and remove the front roller.
Remove running deck
1. Remove the eight screws and eight flat washers that hold the deck in place using a 7/16" Socket
wrench.
2. Slide the running deck out of the frame.
Cybex 770T/790T Treadmill Part Number
Page 146 of 261
Item Description
1 Front roller
2 Drive belt
3 Mounting bolt
4 Tensioning slot
Item Description
1 7/16" Bolts
2 Flat washer
3 Running deck
4 Running belt
Qty.
1
1
1
1
Qty.
8
8
1
1