Installation And Operating Instructions; Limited Warranty; General Information; Hazard Statements - Grundfos MAGNA3 D Installation And Operating Instructions Manual

Hide thumbs Also See for MAGNA3 D:
Table of Contents

Advertisement

Available languages

Available languages

1. Limited warranty

Products manufactured by Grundfos Pumps Corporation
(Grundfos) are warranted to the original user only to be free of
defects in material and workmanship for a period of 30 months
from date of installation, but not more than 36 months from date
of manufacture. Grundfos' liability under this warranty shall be
limited to repairing or replacing at Grundfos' option, without
charge, F.O.B. Grundfos' factory or authorized service station,
any product of Grundfos manufacture. Grundfos will not be liable
for any costs of removal, installation, transportation, or any other
charges that may arise in connection with a warranty claim.
Products which are sold, but not manufactured by Grundfos, are
subject to the warranty provided by the manufacturer of said
products and not by Grundfos' warranty.
Grundfos will not be liable for damage or wear to products caused
by abnormal operating conditions, accident, abuse, misuse,
unauthorized alteration or repair, or if the product was not
installed in accordance with Grundfos' printed installation and
operating instructions and accepted codes of good practice. The
warranty does not cover normal wear and tear.
To obtain service under this warranty, the defective product must
be returned to the distributor or dealer of Grundfos' products from
which it was purchased together with proof of purchase and
installation date, failure date and supporting installation data.
Unless otherwise provided, the distributor or dealer will contact
Grundfos or an authorized service station for instructions. Any
defective product to be returned to Grundfos or a service station
must be sent freight prepaid; documentation supporting the
warranty claim and/or a Return Material Authorization must be
included if so instructed.
Grundfos will not be liable for any incidental or consequential
damages, losses, or expenses arising from installation, use, or
any other causes. There are no express or implied warranties,
including merchantability or fitness for a particular purpose, which
extend beyond those warranties described or referred to above.
Some jurisdictions do not allow the exclusion or limitation of
incidental or consequential damages and some jurisdictions do
not allow limitations on how long implied warranties may last.
Therefore the above limitations or exclusions may not apply to
you. This warranty gives you specific legal rights and you may
also have other rights which vary from jurisdiction to jurisdiction.
Products which are repaired or replaced by Grundfos or
authorized service center under the provisions of these limited
warranty terms will continue to be covered by Grundfos warranty
only through the remainder of the original warranty period set
forth by the original purchase date.

2. General information

2.1 Hazard statements

The symbols and hazard statements below may appear in
Grundfos installation and operating instructions, safety
instructions and service instructions.
DANGER
Indicates a hazardous situation which, if not avoided,
will result in death or serious personal injury.
WARNING
Indicates a hazardous situation which, if not avoided,
could result in death or serious personal injury.
CAUTION
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate personal injury.
The hazard statements are structured in the following way:
SIGNAL WORD
Description of hazard
Consequence of ignoring the warning.
- Action to avoid the hazard.

2.2 Notes

The symbols and notes below may appear in Grundfos
installation and operating instructions, safety instructions and
service instructions.
Observe these instructions for explosion-proof
products.
A blue or grey circle with a white graphical symbol
indicates that an action must be taken.
A red or grey circle with a diagonal bar, possibly with
a black graphical symbol, indicates that an action
must not be taken or must be stopped.
If these instructions are not observed, it may result in
malfunction or damage to the equipment.
Tips and advice that make the work easier.
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents