Grundfos MAGNA3 D Installation And Operating Instructions Manual page 54

In this menu, you can set the "Home" display to show up to four
user-set parameters or a graphical illustration of a performance
curve.
1. Choose "Select Home display type" with
[OK].
2. Select "List of data" with or
3. A list of parameters appears in the display. Select or deselect
with [OK].
4. Return to "Select Home display type" with
5. Select "Graphical illustration" with
6. Select the desired curve. Press [OK] to save.
To specify the contents, go to "Define Home display contents".
Setting: "Define Home display contents"
1. Choose "Define Home display contents" with
press [OK].
2. To set "List of data" with or
3. A list of parameters appears in the display. Select or deselect
with [OK].
The selected parameters are now visible in the "Home" menu.
See fig. 61. The arrow indicates that the parameter links to the
"Settings" menu and works as a shortcut for quick settings.
Fig. 61 Example: "Home" menu parameters
"Display brightness"
Navigation
"Home" > "Settings" > "General settings" > "Display brightness"
Setting
1. Press [OK].
2. Set brightness with and
3. Press [OK] to save.
54
or and press
. Press [OK].
.
or and press [OK].
or and
.. Press [OK].
.
"Return to factory settings"
Navigation
"Home" > "Settings" > "General settings" > "Return to factory
settings"
Setting
To overwrite the current settings with the factory settings, select
"Yes" with or and press [OK].
You can recall the factory settings and overwrite the current
settings. All user settings in the "Settings" and "Assist" menus are
set back to the factory settings. This also includes language,
units, setup of analog input, multipump function, etc.
"Run start-up guide"
Navigation
"Home" > "Settings" > "General settings" > "Run start-up guide"
Setting
To run the startup guide, select "Yes" with
[OK].
The startup guide automatically starts when you start the pump
for the first time; however, you can always run the startup guide
later via this menu.
The startup guide guides the user through the general settings of
the pump, such as language, date and time.
or and press