Setting The Product; Operating Panel; Menu Structure - Grundfos MAGNA3 D Installation And Operating Instructions Manual

9. Setting the product

CAUTION
Hot surface
Minor or moderate personal injury
- At high liquid temperatures, the pump housing may
be so hot that only the operating panel may be
touched to avoid burns.

9.1 Operating panel

Fig. 56 Operating panel
Button Function
Goes to the "Home" menu.
Returns to the previous display.
Navigates between main menus, displays and
digits.
When the menu is changed, the display always
shows the top display of the new menu.
Navigates between submenus.
Saves changed values, resets alarms and expands
the value field.
40

9.2 Menu structure

The pump incorporates a startup guide which is started at the first
startup. After the startup guide, the four main menus appear in
the display. See section 8. Control functions.
"Home"
This menu shows up to four user-defined parameters with
shortcuts or a graphical illustration of a performance curve. See
section 9.4 "Home" menu.
"Status"
This menu shows the status of the pump and system as well as
warnings and alarms. See section 9.5 Status menu.
You cannot make settings in this menu.
"Settings "
This menu gives access to all setting parameters. You can make
a detailed setting of the pump in this menu. See section
9.6 "Settings" menu.
"Assist"
This menu enables assisted pump setup, provides a short
description of the control modes and offers fault advice. See
section 9.7 "Assist" menu.
• Shortcut to control mode settings
• Shortcut to setpoint settings
• "Estimated flow"
• "Head".