Home" Menu; Status Menu - Grundfos MAGNA3 D Installation And Operating Instructions Manual

9.4 "Home" menu

Navigation
"Home"
Press to go to the "Home" menu.
This menu offers the following (factory setting):
• Shortcut to "Control mode" settings
• Shortcut to "Setpoint" settings
• Estimated flow
• Head.
Navigate in the display with or
two shortcuts with or .
Display icons
Symbol Description
Automatic night setback function is enabled.
Settings are locked. You cannot adjust settings
from the display.
The pump is in remote mode, for example from
fieldbus.
The multipump system is active.
Master pump in a multipump system.
Slave pump in a multipump system.
Forced local mode is active.
You cannot set the pump to remote mode, for
example from fieldbus.
You can define the "Home" display. See section "Define Home
display", page 53.
, and change between the

9.5 Status menu

Navigation
"Home" > Status
Press and go to the Status menu with
This menu offers status information on the following:
• Operating status
• Pump performance
• Power and energy consumption
• Warning and alarm
• Heat energy monitor
• Operating log
• Fitted modules
• Date and time
• Pump identification
• Multipump system
Navigate between the submenus with
submenu with and return to the Status menu with
Detailed information on "Heat energy monitor" is available in the
following section 9.5.1 "Heat energy monitor".
Fig. 57 Example of the submenu "Operating status" showing
the pump running in normal operation in a multipump
system.
.
or . Choose a
.
43