Table of Contents
Advertisement
Ÿ
SX128 MODEM PPP
Ÿ
SX128 MODEM V120
Ÿ
SX128 MODEM X75
Verify that there are no exclamation points next to any of the devices in the list. (An
exclamation point indicates that the device is not functional.)
Software Installation for Windows NT 4.0
Before you begin installing the driver for Windows NT 4.0, you must physically remove
all PCMCIA devices from your laptop computer, which includes undocking it from any
docking station that you may use. This action is required because of limitations in the
support that Windows NT 4.0 provides for laptop computers. Please note that because
of the limitiations in the operating system, the DataFire GO! PRO may not work in all
models of laptop computer.
1.
Shut down the computer.
2. Physically install the PC Card as shown on page 6.
3.
Turn the computer back on.
4. When the Windows NT 4.0 desktop is displayed, go into the Control Panel then
double-click on the Modems icon.
5. Click Add.
6. In the new modem installation window, do not select the Don't detect my
modem; I will select it from a list option, then click Next. A new screen
informs you that a standard modem has been detected on communication port
COMx.
7. Click Change, then click Have Disk....
Windows NT then asks you for the PC Card installation disk.
9
Advertisement
Table of Contents
