Table of Contents
Advertisement
8. Insert the DataFire GO! PRO CD into the drive, then click on OK. Windows NT
looks for the drivers available on the disk and displays the name of the driver it
finds.
9. Select the PC Card modem then Next.
A new screen informs you that the modem has been correctly configured.
10. Click Finish. The name of your modem will be displayed in the list of modems
declared under Windows NT.
11. Click Close to continue the installation procedure. Windows NT then asks if you
wish to configure remote network access for the PC Card.
12. Click Yes, and then in the next window click Add.
13. Confirm installation of the PC Card peripheral by clicking OK, then click
Continue.
14. Restart your computer by clicking Yes.
Note: You can stop at this point if you intend to use only the PSTN feature of the
product. In order to install other software components of the product (ISDN, GSM,
etc.) follow the steps described next. Please be aware that you should only install
software support for the hardware you currently have. Doing otherwise will cause
errors in Windows NT 4.0.
15. Begin the installation of the DataFire GO! PRO ISDN/GSM/PCS/LAN software by
running the SETUP.EXE program that is located in the root directory of the CD.
This program will guide you through the installation of all the options you have
purchased.
Note: If your browser is not capable of displaying frames, the online documenation
will not display when you select the Yes, I want to read the documentation
option.
16. When the installation process completes and the program prompts you to reboot the
machine, select Yes.
10
Advertisement
Table of Contents
