Digi DataFire GO! PRO Manual page 14

Configuring One-Channel Dial-Up Connections (Windows 95/98)
This procedure describes how to configure one-channel dial-up connections. A one-
channel connection uses one B-channel, meaning you can make calls at rates up to 64
Kbps. The other channel is available to handle another call.
This procedure assumes that the PC Card and related software have already been
installed.
1. Double-click My Computer and Dial-Up Networking.
2. Press Next if prompted and then double-click Make New Connection.
3. Next, supply a name for the connection.
4. Select the DataFire GO! PRO PC Card device you intend to use for this connection:
Ÿ
56K PC Card Caller ID is used for asynchronous PSTN and GSM/PCS
connections.
Ÿ
SX128 MODEM is used for asynchronous applications generally designed for
PSTN modems. These applications can make 64Kbps (1 B-Channel only)
HDLC ISDN connections.
•
SX128 MODEM PPP is for asynchronous applications generally designed for
PSTN modems. These applications can make 64Kbps (1 B-Channel only) ISDN
connections with the PPP protocol (asynchronous/synchronous conversion and
PAP/CHAP security).
ISDN Configuration Instructions
14