Digi DataFire GO! PRO Manual page 8

Note: You can stop at this point if you intend to use only the PSTN feature of the
product. In order to install other software components of the product (ISDN, GSM,
etc.) continue with the steps described next.
6. If you are installing the ISDN option, and you intend to use Multi-Link PPP, ensure
that a Microsoft Dial-Up Networking upgrade is installed. See Ensuring that a
Dial-Up Networking Upgrade is installed on page 13.
7. Begin the installation of the DataFire GO! PRO ISDN/GSM/PCS/LAN software by
running the SETUP.EXE program that is located in the root directory of the CD.
This program will guide you through the installation of all the options you have
purchased.
Note: It is important to choose to run the loader program when prompted at the end
of the installation. The loader program will download the newly installed programs
to the DataFire GO! PRO PC Card to provide complete functionality of all the
options you selected to install.
8. Last, when
the program prompts you to reboot the machine select Yes.
Your installation is now complete. Verify that the software installation has been
successful by following the procedure on the next page.
Verifying a Windows 95/98 Installation
1. From the Control Panel, double-click the System icon.
2. Select the Device Manager.
3. Expand the Modem list, if necessary.
4. Depending on the options you have installed, the following items will appear in the
list.
Ÿ
56K PC Card Caller ID
Ÿ
SX128 MODEM
8