Digi DataFire GO! PRO Manual page 19

If the trouble is causing harm to the network, the telephone company may request that you remove the product from the
network until the problem is resolved. User repairs must not be made. Doing so voids the user's warranty.
Do not install the product on public coin service provided by the telephone company. Connection to party line service is
subject to state tariffs. (Contact your state public utilities commission for information.)
It is recommended that the customer install an AC surge arrestor in the AC outlet to which this device is connected. This is to
avoid damaging the equipment caused by local lightning strikes and other electrical surges.
FCC Part 68
Ringer Equivalence Number:
USOC Jacks:
This product complies with Part 68 of FCC Rules. On the bottom of the analog line interface device is a label that includes the
FCC Registration Number and Ringer Equivalence Number for this product. If requested, this information must be provided
to the telephone company.
The REN is used to determine the number of devices you may connect to your telephone line and still have all of those
devices ring when your number is called. In most, but not all, areas, the sum of the RENs of all devices connected to one line
should not exceed five (5.0). To be certain of the number of devices you may connect to your line, as determined by the REN,
you should contact your telephone company to determine the maximum REN for your calling area.
If your Digi product interferes with the network, the Telephone Company may discontinue your service temporarily. If
possible, they will notify you in advance. If this isn't practical, you will be notified as soon as possible. You will be informed
of your right to file a complaint with the FCC.
Your telephone company may make changes in its facilities, equipment, operations or procedures that could affect the proper
function of your Digi product. If it does, you will be notified in advance to give you an opportunity to maintain uninterrupted
telephone service.
Problems with your Digi Product
If you experience trouble with your Digi product, please contact Digi Technical Support for information on obtaining
service or repairs. Do not attempt to repair the product yourself. The telephone company may ask you to disconnect the
product from the network until the problem has been corrected or you are sure that the equipment is not malfunctioning
Industry Canada Compliance
Ringer Equivalence Number (REN)
The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number
of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combina-
tion of devices, subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not
exceed 5. The REN assigned to this product is not applicable.
19