Uninstalling The Software - Digi DataFire GO! PRO Manual

For GSM/PCS:
DataFire GO! PRO GSM/PCS cell phone model selection are available using Start >
Programs > 56K PC Card > PC Card Loader.
For LAN:
To access DataFire GO! PRO ethernet adapter properties, use the Control Panel
Network icon. The adapter is installed as 56K PC Card + Ethernet companion
(NIC).
For Online Help:
Online technical manuals for each option installed, in the language you selected
during installation, are located at the Start > Programs > 56K PC Card folder.
What Next?
The DataFire GO! PRO is ready for use. Attach the appropriate cables to
complete your installation. See the online documents for additional informa-
tion about cabling for the options you are using.

Uninstalling the Software

To remove the DataFire GO! PRO software from your system, do the following:
1. Select Start > Settings > Control Panel > Add/Remove Programs.
2. Select 56K PC Card
3. Click Add/Remove to remove the software.
Note: Physically remove the DataFire GO! PRO PC Card if you do not want the system
to detect it the next time the system reboots.
12