Configuring The Devices - Digi DataFire GO! PRO Manual

Configuring the Devices

Depending on the DataFire GO! PRO options you have installed, you may have
additional setup tasks to perform. The following software components are available for
you to use:
For PSTN:
Ÿ
To access DataFire GO! PRO PSTN modem properties, use the Control Panel
Modem icon. The modem is installed as 56K PC Card Caller ID.
Ÿ
To change operation mode between V.90 and K56Flex, use Start > Programs >
56K PC Card > PC Card Loader.
For ISDN:
Ÿ
The DataFire GO! PRO ISDN setup program, SX128 Communication Manager, is
available to control MSN numbers, and TAPI and CAPI configuration. SX128 can
be accessed using the SX128 icon (in the tray area of the toolbar) or by clicking
Start > Programs > 56K PC Card > ISDN Setup.
Ÿ
If you have installed the TAPI software (using SX128) you will also need to use the
Microsoft ISDN Configuration Wizard to control switch types and directory
numbers (and in North America, SPIDS). Access the wizard using Start >
Programs > Accessories > Communications (Win98) or ISDNTools
(Win95).
Note: You must install the DataFire GO! PRO TAPI software before using the
Microsoft ISDN Configuration Wizard in order for the wizard to recognize the PC
Card.
11