Installation; Technical Data - Siemens SINAMICS S120 Combi Equipment Manual

11.2.5

Installation

Figure 11-7 Hole drilling pattern for installation
1. Fit the DRIVE-CLiQ coupling to the mounting surface in accordance with the drilling
2. Remove the protective caps from the DRIVE-CLiQ coupling.
3. Insert the DRIVE-CLiQ plugs at both ends of the DRIVE-CLiQ coupling until they latch
11.2.6

Technical data

Table 11- 2
DRIVE-CLiQ coupling
6SL3066-2DA00-0AB0
Weight
Degree of protection
SINAMICS S120 Combi
Manual, Edition 05.2010, 6SL3097-4AV00-0BP0
pattern.
into place.
Technical data
Unit
kg
IP67 acc. to EN 60529
Accessories
11.2 DRIVE-CLiQ coupling
0.272
241