Siemens SINAMICS S120 Combi Equipment Manual page 8

Preface
Test certificates
The Safety Integrated functions of SINAMICS components are generally certified by
independent institutes. An up-to-date list of certified components is available on request from
your local Siemens office. If you have any questions relating to certifications that have not
been completed, please ask your Siemens contact.
EC Declarations of Conformity
The EC Declaration of Conformity for the EMC Directive can be found/obtained:
● on the Internet:
● at the relevant regional office of the I DT MC Business Unit of Siemens AG
The EC Declaration of Conformity for the Low Voltage Directive can be found/obtained
● on the Internet
Note
When operated in dry areas, SINAMICS S devices conform to the Low Voltage Directive
73/23/EEC or 2006/95/EEC.
Note
SINAMICS S devices fulfill EMC Directive 89/336/EEC or 2004/108/EC in the configuration
specified in the associated EC Declaration of Conformity and when the EMC installation
guideline is implemented, Order No. 6FC5297-0AD30-0⃞P⃞.
Note
The Equipment Manual describes a desired state which, if maintained, ensures reliable
operation as desired and compliance with EMC limit values.
Should there be a deviation from the Equipment Manual requirements, appropriate actions
(e.g. measurements) must be taken to check/prove that the desired reliable operation is
ensured and EMC limit values are complied with.
8
http://support.automation.siemens.com
under the Product/Order number 15257461
http://support.automation.siemens.com
under the Product/Order number 22383669
SINAMICS S120 Combi
Manual, Edition 05.2010, 6SL3097-4AV00-0BP0