Installation - Siemens SINAMICS S120 Combi Equipment Manual

Additional system components
9.1 Terminal Module TM54F
9.1.5

Installation

Installation
1. Tilt the component backwards slightly and attach it to the DIN rail using the hook.
2. Push the component towards the DIN rail until you hear the mounting slide at the rear
3. You can now move the component to the left or right along the DIN rail, until it reaches its
Removal
1. The lug on the mounting slide first needs to be pushed down to unlock the slide from the
2. The component can now be tilted forwards and pulled up and off the DIN rail.
Figure 9-4
192
latch into position.
final position.
DIN rail.
Removal of a component from a DIN rail
SINAMICS S120 Combi
Manual, Edition 05.2010, 6SL3097-4AV00-0BP0