Calibration; Instrument Calibration Mode - Datacolor Elrepho 3000 Manual

Elrepho 3000
5. Read the Diagnostic Tile ( See User Diagnostics)
Once the instrument has been set up to conform to your operating
e nvironment, a job can be defined, and measurements can be made
a nd displayed.

Calibration

Instrument Calibration Mode

This is accessed by selecting the CALIB soft key from the Displ
Mode (see the Quick Start section). This is where you perform
routine calibration of the instrument using a black trap and user
selected white calibration standard. The parameters for the white
c alibration standard can be
option in the Setup Mode.
12
set up by selecting the CALIB SETUP
Datacolor International
ay