Appendix C: Software Version Updates - Datacolor Elrepho 3000 Manual

Elrepho 3000
Appendix C: Software Version
Updates
Version 1.10
•
Support added for up to five different languages.
•
Added Print Contrast task support.
•
External keyboard support enhanced. Keys supported include A-Z, 0-9,
+, -, Home, End, Page Up, Page Down, Up Arrow, Down Arrow, Left
Arrow, Right Arrow, and the Enter key (↵).
•
Printer speed improved by about 50%.
•
Password protection support added to the Setup Mode.
•
Display Mode soft key functions changed to provide quicker access to
the Measurement Mode and quicker access to the print soft key.
•
Measurement Mode modified to allow the entry into the Display Mode
as soon as all measurements for the sample are completed. Previously
the VIEW soft key would need to be pressed to allow viewing of the
measurement's results.
•
Modified the manner in which the BACK key functions in the
Measurement Mode. If a job's setup indicates more than one
measurement is to be taken for each sample reading, the BACK key
results in canceling only the last measurement, not all the measurements
as did the original version.
•
Added ability to print the Ganz/Griesser parameters, the
Whiteness/UVCAL setup settings, the system information (software
version, serial number, MC90 number, model).
•
Added ability to delete all jobs and all samples to the Data Maintenance
Mode.
•
Fixed bug in Ganz/Griesser Parameter Calibration Mode which
prevented the values of the whiteness standards from being saved. Now
the values are stored and will be offered as the default value when
prompted to measure the whiteness standards.
68 Datacolor International