Sample Selection Mode; Editing A Name Field - Datacolor Elrepho 3000 Manual

Elrepho 3000
an existing job. Refer to that section for details
on its operation.
S AMP Enters "Sample Selection" mode, which allows
the selection of previously stored sample data.
CALIB Enters th
that section for details.
HOST Enters the Host Mode, which allows
com munications with your PC.
SETUP Enters the main level
that section for details.

Sample Selection Mode

Press the SAMP key in the Display Mode to select a previously
saved sample for the current job; a list of all samples saved will b
displayed.
Not available if samples have not bee

Editing a Name Field

Most data in the Elrepho 3000 is referenced by name. This includes
tasks, procedures, jobs and sample measurements. All modes will
provide default names for their data, however, you may want to e
the name to better indicate what it is.
When editing a name, the editable character in the name will be
highlighted. If the first character of the name is highlighted and the
name has not yet been edited, the name will be cleared when the
EDIT key is pressed fo r the first time. This provides a quick way to
erase the default name.
When a name field is highlighted, the following soft key labels will
be displaye d.
↓
10
e Instrument Calib ration Mode. Refer to
of the Setup Mode. Refer to
n saved for the current job.
EDIT SAVE
Datacolor International
e
dit