Main Screen; Calibration - Datacolor ColorReaderPRO DC10-1 User Manual

Main Screen

Below is the Datacolor ColorReaderPRO main screen. You can access the application
features from the icons at the bottom of the screen.

Calibration

Calibrate the device every 8 hours to account for any changes in the device over time. This
ensures that the measurements remain consistent over time. The Datacolor ColorReader
mobile application will remind you when calibration is required. Use the mobile application to
calibrate the unit.
1. After connecting,
tap Device in
bottom left corner
3. Tap Calibrate.
4. The application will report that the device is
calibrated. Tap Done in the top left corner to
return to the main screen.
Datacolor ColorReaderPRO
Device
History
Colors
Palettes
Select the calibration tab
at the top
2. Place the ColorReaderPRO on the
calibration tile.
• 9