Job/Sample Maintenance Mode; Job View Mode - Datacolor Elrepho 3000 Manual

Elrepho 3000
Data Maintenance Mode

Job/Sample Maintenance Mode

This mode is used to:
• Create new jobs, edit settings for existing jobs, delete jobs and
samples associated with jobs (Job Edit Mode)
• View or print existing jobs (Job View Mode)
To create a new job:
1. From the main menu, press SETUP, then SEL to select "Data
Maintenance" from the Setup menu.
2. Press SEL again to select "JOBS".
3. Press SEL again to select "NEW JOB".
↓
4. Press the key to accept the defaults displayed, or press EDIT
then use the arrow keys to enter new data. Refer to the Job Edit
Mode for a description of all fields.
5. Press SAVE when complete.

Job View Mode

This Mode displays the job's settings. It also allows you to print, or
edit the job.
This mode is entered by pressing the SEL key while on the name of
an existing job in the Job Setup Mode.
28 Datacolor International