Instrument Setup - Datacolor Elrepho 3000 Manual

The func tion of these keys are as follows:
Use to move through the characters
↓
Use to move down to the next field.
E DIT Use to change the character cu
next character in the alphabet.
SAVE Use to keep setti
screen.
I n addition, the following k
when editing name fields:
Home Moves to the first character in a "name" field.
End Moves to the last character in a "name" field.
Up Arrow Highlights the previous option or item.
Down Arrow Highlights the next option or item.
Left Arrow Moves one character to the left in a "name" field.
Right Arrow Moves one character to the right in a "name" field.
I nstrument Setup
After you have used and tested the DEMO PROCEDURE and
measurement tasks supplied with your system (discussed in the
Quick Start section), the Elrepho 3000 should be set up to me
r equirements of your facility.
Listed below are the requirements to set up your instrume nt:
1. Define the Measurement Tasks to be used (see Data
Maintenance Mode - Task Maintenance)
2. Define the Procedures to be used (see Data Maintenance M
- Procedure Maintenance)
3. Establish the Calibration Setup to use and set the UV f
calibrator position (See Setup Mode - Calibration Setu
4. Calibrate the instrument (see Calibration - Instrume
Calibration )
Datacolor International
11
Elrepho 3000
of a name.
rrently highlighted to the
ngs for all fields edited on the current
eys on the external keyboard function
ilter
p)
nt
et the
ode