Measure Button; Aperture Plates; Accessories; Sample Placement - Datacolor Elrepho 3000 Manual

See Figure 1 in the Quick Start section.

Measure Button

The measure button is the red button on the front of the instrument
to the left of the viewer. See Figure 1 in the Quick Start section.

Aperture Plates

Three aperture plates are included: the XLAV, SAV and USAV
plates allow accurate measurements of small and very small
samples, while the extra large area view plate is recommended for
irregular and textured sample averaging.
Aperture plates should be installed with the beveled edge facing the
sphere and the side stamped with the plate size facing the sample
holder.

Accessories

The standard instrument is supplied with an accessory box
containing the following:
White Tile
Black Trap
Green Tile (for diagnostic testing)
XLAV Aperture Plate (shipped with the aperture in place)
The Model 3300 is also equipped with an external printer and
keyboard as standard features; these are optional on the Model
3100..
Instrument Overview

Sample Placement

Figure 3 illustrates the position for sample placement, (and also
placement of the black trap and white tile for calibration).
The cylindrical, spring loaded sample holder can be depressed to
position your sample; a quarter turn to the right will lock it in
Datacolor International
Elrepho 3000
SAV Aperture Plate
USAV Aperture Plate
5