Appendix B: Password Protection - Datacolor Elrepho 3000 Manual

Green/red tint - A measure of the deviation from the whiteness of
the material towards the red or green region determined under the
conditions specified in SCAN-P 66.
Fluorescence component (of whiteness) - A measure of the extent
to which the whiteness of the material is affected by excitation of
added fluorescent whitening agent (FWA).
Metamerism index - The Delta E difference in colour between two
samples in one illumination when they have the same color in
another illumination.

Appendix B: Password Protection

NOTE: This section can be removed and placed elsewhere if you
intend to use password protection and want to restrict entry into
password protected areas.
Password Protection Overview
You can now configure the Setup Mode with password protection
to secure important Setup data. If you use this feature, a password
must be entered before access is granted.
The Password consists of a sequence of "digits" which is defined by
pressing the three leftmost soft keys in the desired sequence.
Each of these three keys are assigned a number 1, 2, or 3. The
password sequence can consist of between one and ten digits.
When password protection is enabled, the password will need to be
entered before access to the Setup Mode is granted. Password
protection wil be disabled by default.
The addition of this feature will require three new modes:
• Password Setup Mode
• Password Setup Verification Mode
• Password Verificatio Mode
Datacolor International
65
Elrepho 3000