Sleep Mode Time; Date/Time - Datacolor Elrepho 3000 Manual

System Setup

Sleep Mode Time

This mode sets the time that the LCD back light will remain on.
To extend the life of the back light panel, it will automatically turn
off after the instrument has not been used for the amount of time
you specify in this mode.
The back light will turn on again when any soft key is pressed, the
measure button is pressed, the viewer shutter is opened or closed, or
when data is received from the host PC. We suggest that you toggle
the shutter viewer to turn on the back light.
Use the - and + keys to change the highlighted field, then press
SAVE to keep the change.
You can press DFLT to accept the displayed number of minutes.

Date/Time

This mode allows the month, day, year, hour, minute and second
format to be adjusted. When this mode is selected, the current date
and time are displayed, and those values are used as the defaults for
the edit fields.
Use the plus and minus keys to change the highlighted field values.
Use the SAVE key to save the changes.
N
OTE: Press the MENU key not to save any changes and
and return to the System Setup Mode.
Datacolor International
41
Elrepho 3000