Illuminant Enable/Disable; Formula Enable/Disable - Datacolor Elrepho 3000 Manual

Elrepho 3000
System Setup

Illuminant Enable/Disable

This mode is used to enable or disable illuminants. Only enabled
illuminants will be available when creating and editing tasks. This
mode also determines the order in which the illuminants are
displayed when selecting them during task creation.
When the instrument is first set up, all illuminants are enabled.
Use the arrow keys to move up and down the list of illuminants.
Use ADD and REM to add or remove illuminants. The numbers
which indicate the order are adjusted accordingly.

Formula Enable/Disable

This mode is used to enable or disable formulas. Only enabled
formulas will be available when creating and editing tasks. This
mode also determines the order in which the formulas are displayed
when selecting them during task creation.
When the instrument is first set up, three default formulas are
enabled:
• CIE LAB VALUES
• CIE WHITENESS
• R457 BRIGHTNESS
Use ADD and REM to add or delete formulas from the list you will
see displayed. The numbers that indicate the order are adjusted
accordingly.
40 Datacolor International