Raven SmarTrax Installation Manual page 16
Gps steering control system
Hide thumbs
Also See for SmarTrax:
- Calibration and operation manual (156 pages) ,
- Operation manual (73 pages) ,
- Installation manual (59 pages)
Table of Contents
Advertisement
Chapter 4
Mounting Plate Example
FIGURE 2.
Remove the two bolts from monitor mounting bracket and mount the node as shown.
2.
Raven Interface Cable Connected
FIGURE 3.
Insert the large, rectangular node connectors on the harness cable (P/N 115-4001-025) into the correct
3.
ports of the SmarTrax node.
Remove the side panel and locate the 3 pin power connector.
4.
Power Connector
FIGURE 4.
14
Challenger MT 7XXC and MT 8XXC Series SmarTrax Installation Manual
Advertisement
Table of Contents
