Changing the Belt on the Cutting Unit
!
WARNING!
Wear gloves to protect your hands
when working with the blades.
There is a risk of crush injuries
when working with the belt.
On cutting units with 'collision-proof' blades,
the blades are driven by a V-belt. Do as
follows to replace the V-belt:
1.
Remove the cutting unit.
2.
Open the lock for the track rod bolt.
3.
Remove the bolt so the track rod is
released in one end.
4.
Unscrew the bolt holding the unit frame
bracket.
Remove the lock and pass the unit frame
out.
80
English-
REPAIR INSTRUCTIONS