Table of Contents
Advertisement
Microswitch: Mowing Deck
See "Adjusting the Lever Housing" on
page 69 for adjustment instructions.
Microswitch: Seat
The microswitch is located on the underside
of the seat and can be replaced together with
the holder without adjustment. The switch
inside the holder cannot be replaced alone as
it is glued into place.
Micro Switch Pedal Arrangement
1.
Remove the transmission cover.
2.
Check the hydrostatic cable adjustment.
See "Adjusting the Hydrostatic
Transmission Cable" on page 46.
3.
Remove the cover from the frame tunnel.
4.
Adjust the microswitch so that it clicks
when the parking brake pedal is pressed
down approximately 40 mm / 1.5".
Note: The spring on the parking brake
cable can be unhooked to improve
accessibility.
5.
Replace the transmission cover and the
cover over the frame tunnel.
94
English-
ELECTRICAL SYSTEM
Microswitch: Mowing Deck
Microswitch: Seat
Micro switch pedal arrangement
Advertisement
Table of Contents
