Cisco CDE 220 Series Hardware Installation Manual page 85

Chapter 2 Preparing to Install the Content Delivery Engines
Warning The covers are an integral part of the safety design of the product. Do not operate the unit
without the covers installed. Statement 1077
Warning This product is not intended to be directly connected to the Cable Distribution System.
Additional regulatory compliance and legal requirements may apply for direct connection to the
Cable Distribution System. This product may connect to the Cable Distribution System ONLY
through a device that is approved for direct connection. Statement 1078
Hazardous voltage or energy may be present on power terminals. Always replace cover when
Warning
terminals are not in service. Be sure uninsulated conductors are not accessible when cover is in
place. Statement 1086
Avoid using or servicing any equipment that has outdoor connections during an electrical storm.
Warning
There may be a risk of electric shock from lightning. Statement 1088
Main Land China Only
Warning
Only use at altitude 2000M or lower area.
Only use in non-tropical locations. Use in air conditioned room when in tropical locations.
AC Power Option Warnings
These warnings apply only to CDEs with the AC power option.
The device is designed to work with TN power systems. Statement 19
Warning
Connect the device to a grounded power outlet. Statement 25
Warning
DC Power Option Warnings
These warnings apply only to CDEs with the DC power option.
Cisco Content Delivery Engine 205/220/250/280/285/420/460/475 Hardware Installation Guide
Safety Warnings
2-7