Cisco CDE 220 Series Hardware Installation Manual page 225

Appendix E Configuring VDS-IS CDE280 Disks
Figure E-8
Select OK.
Step 19
The confirmation popup window appears. Select OK and view the Virtual Drive created using the
selected disk.
Repeat the procedure from step 16 to step 19 for creating virtual drives with the entire unconfigured
Step 20
drives.
On successful creation of the virtual drives for each disk you can view 24 Device Groups and 24 Virtual
Drives under the Controller information.
Figure E-9
Virtual Drive Management
Adding the Virtual Drives
Cisco Content Delivery Engine 205/220/250/280/285/420/460/475 Hardware Installation Guide
Changing the Disk Status Using KVM Console
E-7