Cisco CDE 220 Series Hardware Installation Manual page 222

Changing the Disk Status Using KVM Console
Figure E-4
Select OK and press Enter.
Step 13
On successful conversion, you can view all the disks displayed under Unconfigured Drives in the
Virtual Drive Management (VD Mgmt) window.
Press Ctrl-N key combination to go to Physical Drive Management (PD Mgmt) window.
Step 14
You can view all the disks state as Unconfigured Good in the PD Management window.
Cisco Content Delivery Engine 205/220/250/280/285/420/460/475 Hardware Installation Guide
E-4
Selecting all the Disks
Appendix E Configuring VDS-IS CDE280 Disks