Cisco CDE 220 Series Hardware Installation Manual page 220

Changing the Disk Status Using KVM Console
Figure E-1
On successful completion, the MegaRAID configuration utility is loaded and the Virtual Drive
Step 9
Management window displays the No Configuration Present message under Cisco 12G SAS Modular
Raid(Bus 0x04, Dev 0x00). All the 24 new disks that are added are listed under Controller.
Figure E-2
Select Cisco 12G SAS Modular Raid(Bus 0x04, Dev 0x00) and press F2 to change the disk status from
Step 10
JBOD to Online.
Choose Make Unconfigured Good from the drop-down list and press Enter.
Step 11
Cisco Content Delivery Engine 205/220/250/280/285/420/460/475 Hardware Installation Guide
E-2
MegaRAID Configuration Utility
Loading MegaRAID Configuration Utility
Appendix E Configuring VDS-IS CDE280 Disks