Hardware Features
Note
Once the product installation is complete, all I/O cables, except those installed in the Ethernet ports,
Caution
must be disconnected from the CDE to maintain EMC compliance. Any other cable connections are
temporary and are used only to initialize the system. All PS/2 keyboard, PS/2 mouse, USB interface,
serial console interface, and VGA interface cables must be disconnected from the front and rear I/O ports
of the CDE.
Figure 1-8
Cisco Content Delivery Engine 205/220/250/280/285/420/460/475 Hardware Installation Guide
1-58
The CDE280, CDE285-S and CDE285-L engine supports the CIMC (Cisco Integrated
Management Controller).
shows the location of the CDE rear panel ports and connectors.
Chapter 1
Overview of the Content Delivery Engines