Cisco CDE 220 Series Hardware Installation Manual page 152

Re manufacturing a CDE
Figure 4-11
From the Drive/Image File drop down list, select the iso image.
d.
Figure 4-12
Click Map Device.
e.
Reboot the server:
Step 3
From the Power tab, select Power Cycle Systems (cold boot) to reboot the server.
Figure 4-13
Install the VDS-IS Software for CDE280:
Step 4
Connect to the serial console of CDE280:
a.
–
Cisco Content Delivery Engine 205/220/250/280/285/420/460/475 Hardware Installation Guide
4-20
Chapter 4
Mapping CD/DVD
Selecting ISO image
Rebooting the Server
Enter the IP address of the server with admin as the username and the password previously set:
Installing the VDS Internet Streamer Software and Initially Configuring a CDE