Cisco CDE 220 Series Hardware Installation Manual page 112

Installing the CDEs
Identifying the Rev. A Inner Rails
The chassis package includes a rack-rail assembly in the rack-mounting kit. Each assembly consists of
an inner rail that secures to the chassis and an outer rail that is attached directly to the rack (see
Figure
Figure 3-16
1
Installing the Rev. A Inner Rails
Perform the following steps to install the inner rails:
Place the inner rails on the side of the chassis, aligning the hooks of the chassis with the inner rail holes.
Step 1
Make sure the rail faces outward so that it will fit with the rack-mounting bracket (see
Slide the rail toward the front of the chassis.
Step 2
Secure the chassis with four screws.
Step 3
Repeat
Step 4
Cisco Content Delivery Engine 205/220/250/280/285/420/460/475 Hardware Installation Guide
3-20
3-16).
Identifying the Rev. A Inner Rails
2
Inner rail assemblies
Step 1 through Step 3 for the other inner rail.
Chapter 3 Installing the Content Delivery Engines
1
CDE
2
Figure 3-17).