Cisco CDE 220 Series Hardware Installation Manual page 142

Launching a New CDE for the First Time
Table 4-1
Name
Trap Community String field
System Contact field
System Location field
Click Save Changes.
Step 6
What to do next
Configure SNMP trap settings as described in
Configuring SNMP Trap Settings
Before You Begin
You must log in as a user with admin privileges to perform this task.
Procedure
In the Navigation pane, click the Admin tab.
Step 1
On the Admin tab, click Communications Services.
Step 2
In the Communications Services pane, click the SNMP tab.
Step 3
Click on Trap Destinations tab.
Step 4
In the Trap Destinations area, you can perform one of the following:
Step 5
•
•
Note
In the Trap Details dialog box, complete the following fields:
Step 6
Cisco Content Delivery Engine 205/220/250/280/285/420/460/475 Hardware Installation Guide
4-10
Chapter 4
Fields to be updated to configure SNMP
Select an existing user from the table and click Modify.
Click Add to create a new user.
If the fields are not highlighted, select Enabled.
Installing the VDS Internet Streamer Software and Initially Configuring a CDE
Description
The name of the SNMP community group used
for sending SNMP trap to other devices.
Enter a string up to 18 characters.
This is only for SNMP v2c users.
Note
The system contact person responsible for the
SNMP implementation.
Enter a string up to 64 characters, such as an email
address or a name and telephone number.
The location of the host on which the SNMP agent
(server) runs.
Enter a string up to 64 characters.
Configuring SNMP Trap Settings.